---
title: "Center of gravity setup"
slug: "center-of-gravity-setup"
updated: 2022-05-20T08:14:39Z
published: 2022-05-20T08:14:39Z
canonical: "help.sovelia.com/center-of-gravity-setup"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.sovelia.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Center of gravity setup

Description

          

Setttings for the Center of Gravity symbol in a drawing.

Controls the symbol scale, label and name for center of gravity symbol in a drawing.

Start from Annotate ribbon, on the Cadit panel: ![CofGIcon](https://cdn.document360.io/b4de53ee-d7ea-47b4-9a73-8323e3c9c14c/Images/Documentation/CofGIcon.jpg)

![CofGSetup](https://cdn.document360.io/b4de53ee-d7ea-47b4-9a73-8323e3c9c14c/Images/Documentation/CofGSetup.jpg)

| Command | Value |
| --- | --- |
| COG Symbol Scale | Symbol scale for the Center of Gravity sketched symbol. Default value from [CaditInventor.ini](/v1/docs/caditinventorini) |
| COG Label | Text for the Prompted entry COG Label.. Default value from [CaditInventor.ini](/v1/docs/caditinventorini) |
| COG Symbol Name | Name for the Center of Gravity sketched symbol. If the symbol is not found in the drawing it will be generated. The generated symbol is a circle with a diameter of 1 mm. The circle is divided into four areas with a horizontal and a vertical line. The upper right and lower left areas are filled with solid hatch. |
| **OK** | Closes the dialog and exit the program. |

Default values for these settings can be set in [CaditInventor.ini](/v1/docs/caditinventorini)

See also [Center of Gravity](/v1/docs/center-of-gravity) and [CaditInventor.ini](/v1/docs/caditinventorini)