---
title: "Cadit Property Editor.ini"
slug: "cadit-property-editorini"
updated: 2022-06-14T09:10:56Z
published: 2022-06-14T09:10:56Z
canonical: "help.sovelia.com/cadit-property-editorini"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.sovelia.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Cadit Property Editor.ini

Cadit Property Editor.ini contains configuration settings for the [Property Editor](/v1/docs/property-editor).

The file is located in the Settings subfolder under the Common Configuration folder or the Local Configuration folder. The program first looks for the file in the Common Configuration folder, then in the Local Configuration folder.

| Section Key | Value | Description |
| --- | --- | --- |
| [Properties Modeling] |  | Factory default property editor setup for modeling files. The first keys are numbered 0. The keys are numbered up for the next properties |
| *AllowSetup=* | 1 | If set to 0, the Setup drop-down and buttons for model files are not shown in the Cadit Property Editor dialog Default: 1 |
| *SetupName=* | <Default> | Default setup name for modeling files. Default: <Default > |
| *PropertySet0=* | Design Tracking Properties | Property set for the first property |
| *Property0=* | Description | Property name for the first property |
| *Prompt0=* | Description | Prompt for the first property |
| *Type0=* | Text | Property type for first property |
|  |  |  |
| [Properties Assembly] |  | Factory default property editor setup for assembly files. The first keys are numbered 0. The keys are numbered up for the next properties |
| *AllowSetup=* | 1 | If set to 0, the Setup drop-down and buttons for assembly files are not shown in the Cadit Property Editor dialog Default: 1 |
| *SetupName=* | <Default> | Default setup name for assembly files. Default: <Default> |
| *PropertySet0=* | Design Tracking Properties | Property set for the first property |
| *Property0=* | Description | Property name for the first property |
| *Prompt0=* | Description | Prompt for the first property |
| *Type0=* | Text | Property type for first property |
|  |  |  |
| [Properties Drawing Layout] |  | Factory default property editor setup for assembly files. The first keys are numbered 0. The keys are numbered up for the next properties |
| *AllowSetup=* | 1 | If set to 0, the Setup drop-down and buttons for drawing files are not shown in the Cadit Property Editor dialog Default: 1 |
| *SetupName=* | <Default> | Default setup name for drawing layout files Default: <Title block> if the drawing has a title block, <Default> if not. |
| *PropertySet0=* | Summary Information | Property set for the first property |
| *Property0=* | Author | Property name for the first property |
| *Prompt0=* | Author | Prompt for the first property |
| *Type0=* | Text | Property type for first property |
|  |  |  |
| [Properties subtype name] |  | Factory default property editor setup for given subtype name files. See Properties Modeling for examples and more information. See under DocumentSubTypeSelector to add document subtypes. The first keys are numbered 0. The keys are numbered up for the next properties |
|  |  |  |
| [Property Modes] |  | Set modes for properties, regardless of document type |
| *Property name=* | disabled | Property is disabled from editing |
| *Property name=* | source | Property is a source property. It is disabled from editing, but the source properties can be edited by clicking the source button icon at the right end of the edit field |
| *Property name=* | listonly | Property can only be selected from the corresponding drop-down menu list |
| *MRU.Property Editor.Property Set Name.Property name=* | Menu section name | Configuaration header name or menu section name of right-klick menu for given property |
|  |  |  |
| [Property Modes Modeling] |  | Set modes for model file properties only |
| *Property name=* | disabled | Property is disabled from editing |
| *Property name=* | source | Property is a source property. It is disabled from editing, but the source properties can be edited by clicking the source button icon at the right end of the edit field |
| *Property name=* | listonly | Property can only be selected from the corresponding drop-down menu list |
| *MRU.Property Editor.Property Set Name.Property name=* | Menu section name | Configuaration header name or menu section name of right-klick menu for given model file property |
|  |  |  |
| [Property Modes Assembly] |  | Set modes for assembly file properties only |
| *Property name=* | disabled | Property is disabled from editing |
| *Property name=* | source | Property is a source property. It is disabled from editing, but the source properties can be edited by clicking the source button icon at the right end of the edit field |
| *Property name=* | listonly | Property can only be selected from the corresponding drop-down menu list |
| *MRU.Property Editor.Property Set Name.Property name=* | Menu section name | Configuaration header name or menu section name of right-klick menu for given assembly file property |
|  |  |  |
| [Property Modes Drawing Layout] |  | Set modes for drawing layout file properties only |
| *Property name=* | disabled | Property is disabled from editing |
| *Property name=* | source | Property is a source property. It is disabled from editing, but the source properties can be edited by clicking the source button icon at the right end of the edit field |
| *Property name=* | listonly | Property can only be selected from the corresponding drop-down menu list |
| *MRU.Property Editor.Property Set Name.Property name=* | Menu section name | Configuaration header name or menu section name of right-klick menu for given drawing layout file property |
|  |  |  |
| [Property Modes subtype name] |  | Set modes for given subtype name file properties only. See under DocumentSubTypeSelector to add document subtypes |
|  |  |  |
| [Property StarToolTip] |  | Adds tooltip text to properties |
| *Property name=* | Tooltip text Tooltip text for the named property. The tooltip is shown by hoovering the star to the left of the edit field |  |
|  |  |  |
| [Property StarToolTip subtype name] |  | Adds tooltip text for given subtype name file properties only. See under DocumentSubTypeSelector to add document subtypes |
|  |  |  |
| [Property MinLength] |  | Set minimum allowed number of characters for properties |
| *Property name=* | Number of characters The named property is not allowed to have less than given number of characters |  |
|  |  |  |
| [Property MinLength subtype name] |  | Set minimum allowed number of characters for given subtype name file properties only. See under DocumentSubTypeSelector to add document subtypes |
|  |  |  |
| [Property MaxLength] |  | Set maximum allowed number of characters for properties |
| *Property name=* | Number of characters | The named property is not allowed to have more than given number of characters |
|  |  |  |
| [Property MaxLength subtype name] |  | Set maximum allowed number of characters for given subtype name file properties only. See under DocumentSubTypeSelector to add document subtypes |
|  |  |  |
| [Property TextCase] |  | Sets property value to uppercase or lowercase |
| *Property name=* | upper | The named property is set to uppercase |
| *Property name=* | lower | The named property is set to lowercase |
|  |  |  |
| [Property TextCase subtype name] |  | Sets property value to uppercase or lowercase for given subtype name file properties only. See under DocumentSubTypeSelector to add document subtypes.. |
|  |  |  |
| [Property DropDownFile] |  | Sets property value from a text file in a dropdown list |
| *Property name=* | Drop down text file.txt | The named property has a dropdown list instead of an edit field. The dropdown list has a list of values from the file Drop down text file.txt. The file is a standard text file. Each line in the file is a line in the list. If a path is not specified, the file must reside in the Property Editor subfolder of the Common Folder |
| *Property name=* | %ExcelFile%\| | Column_1.txt |
|  |  |  |
| [Property DropDownFile subtype name] |  | Sets property value from a text file in a dropdown list, for given subtype file properties only. See Property DropDownFile for more information. See under DocumentSubTypeSelector to add document subtypes |
|  |  |  |
| [Standard Expression List] |  | List of expression to show in expression context menu. The first keys are numbered 1. The keys are numbered up for the next expressions in the list |
| *Expression1=* | =<Property name> | The first expression value in the list of expression. Example: =<Description> |
|  |  |  |
| [Standard Source Properties] |  | Settings for source property editor dialog |
| *Property name1=* *Property name2=* | Source property name | Value is the name of one or more source properties for the given property key name. |
| The first keys are numbered 1. The keys are numbered up for the next Source properties for the same key property |  |  |
|  |  |  |
| [Standard None Properties] |  | Enable disabled properties if ct_cut_info is NONE |
| *ctcutinfo1=* *ctcutinfo2=* | Disabled property name | Value is the name of one or more disabled properties for the given property key name. The first keys are numbered 1. The keys are numbered up for the next disabled properties for the same key property |
|  |  |  |
| [Cadit Cut Info Description list Menu1 Settings] |  | Settings for given context menu |
| *AddCode=* | 0 | If set to 1, both code and description is shown for context menu items. Else only description is shown for context menu items. Default: 0 |
| [Cadit Cut Info Description list Menu1] |  | Context menu for ct_cut_info property |
| *L=* | Longest length | Key is elements of the list and value is a descriptive text Example L = Longest lengt By selecting this element the return value of the field is L. |
| -- | -- | Divider |
| *Menu.Cadit Cut Info Description list Menu2=* | More | Name of extended context menu |
|  |  |  |
| [Special Properties Assembly] |  | Add special Cadit properties to Property Editor Setup for assembly files. The first keys are numbered 0. The keys are numbered up for the next properties |
| *PropertySet0=* | User Defined Properties | Property set for the first property |
| *Property0=* | ct_cut_info | Property name for the first property |
| *Prompt0=* | ct_cut_info | Prompt for the first property |
| *Type0=* | Text | Property type for first property |
|  |  |  |
| [Special Properties Modeling] |  | Add special Cadit properties to Property Editor Setup for modeling files. The first keys are numbered 0. The keys are numbered up for the next properties |
| *PropertySet0=* | User Defined Properties | Property set for the first property |
| *Property0=* | ct_cut_info | Property name for the first property |
| *Prompt0=* | ct_cut_info | Prompt for the first property |
| *Type0=* | Text | Property type for first property |
|  |  |  |
| [Special Properties Drawing Layout] |  | Add special Cadit properties to Property Editor Setup for drawing layout files. The first keys are numbered 0. The keys are numbered up for the next properties |
| *PropertySet0=* | User Defined Properties | Property set for the first property |
| *Property0=* | ct_scale | Property name for the first property |
| *Prompt0=* | ct_scale | Prompt for the first property |
| *Type0=* | Text | Property type for first property |
| [Special Properties subtype name] |  | Add special Cadit properties to Property Editor Setup for given subtype name files. See under DocumentSubTypeSelector to add document subtypes. The first keys are numbered 0. The keys are numbered up for the next properties |
|  |  |  |
| [DocumentSubTypeSelector] |  | Add document sub types to Property Editor The first keys are numbered 0. The keys are numbered up for the next document subtypes |
| *DocumentType0=* | MyCustom | Document sub type name for the first document sub type. Examples: MyCustom, Weld, Sheet Metal, Assembly, Modeling, Drawing Layout, VirtualComponent |
| *PropertyExist0=* | Property set and name | The component has the given subtype if the specified property exists |
| *PropertyEqualsTo0=* | Property set and name\| | Property value |
| *AlternativeNames0=* | List of names divided by \| | The component has the given subtype if the document type is one of the alternatives in the list |
| *DocumentExtention0=* | Document extension name | The component has the given subtype if it has the given file extension. |

See also [Property Editor](/v1/docs/property-editor)

Example: Cadit Property Editor.ini

```
; Settings for Cadit Property Editor
; The file can reside in CaditInventor Common or Local Configuration folder
;
; CaditInventor Local Configuration folder: 
;   The settings folder where the setup program place files.
;   Changes here may be overwritten if the program is reinstalled.
;
; CaditInventor Common Configuration folder: 
;   CaditInventor folder beside Inventor Template folder. 
;   Copy files from Local Configuration folder to this folder if custom settings are required.
;
; The program first looks for the file in the Common Configuration folder, then in Local Configuration folder.

[Properties MyCustom]
; Settings for property editor setup "<Default>"
;AllowSetup=0
;SetupName=MySetup
PropertySet0=Design Tracking Properties
Property0=Description
Prompt0=Description
Type0=Text
PropertySet1=Design Tracking Properties
Property1=Part Number
Prompt1=Part Number
Type1=Text
PropertySet2=Design Tracking Properties
Property2=Stock Number
Prompt2=Stock Number
Type2=Text
PropertySet3=Design Tracking Properties
Property3=Material
Prompt3=Material
Type3=Text
PropertySet4=Design Tracking Properties
Property4=Mass
Prompt4=Mass
Type4=Text

[Properties Weld]
; Settings for property editor setup "<Default>"
;AllowSetup=0
;SetupName=MySetup
PropertySet0=User Defined Properties
Property0=Weld No
Prompt0=Weld No
Type0=Text
PropertySet1=User Defined Properties
Property1=Weld Length
Prompt1=Weld Length
Type1=Text
PropertySet2=User Defined Properties
Property2=Thickness
Prompt2=Thickness
Type2=Text
PropertySet3=User Defined Properties
Property3=Weld Group
Prompt3=Weld Group
Type3=Text
PropertySet4=User Defined Properties
Property4=Weld Type
Prompt4=Weld Type
Type4=Text
PropertySet5=User Defined Properties
Property5=NS FS
Prompt5=NS FS
Type5=Text
PropertySet6=User Defined Properties
Property6=Weld Round
Prompt6=Weld Round
Type6=Yes or No
PropertySet7=User Defined Properties
Property7=Weld Field
Prompt7=Weld Field
Type7=Yes or No
PropertySet8=User Defined Properties
Property8=Weld Size NS
Prompt8=Weld Size NS
Type8=Text
PropertySet9=User Defined Properties
Property9=Weld Size FS
Prompt9=Weld Size FS
Type9=Text

[Properties Sheet Metal]
; Settings for property editor setup "<Default>"
;AllowSetup=0
;SetupName=MySetup
PropertySet0=
Property0=Project 20211103021023633
Prompt0=Project
Type0=Heading 1
PropertySet1=Design Tracking Properties
Property1=Description
Prompt1=Description
Type1=Text
PropertySet2=Design Tracking Properties
Property2=Part Number
Prompt2=Part Number
Type2=Text
PropertySet3=Design Tracking Properties
Property3=Stock Number
Prompt3=Stock Number
Type3=Text
PropertySet4=
Property4=Physical 20211103021033074
Prompt4=Physical
Type4=Heading 1
PropertySet5=Design Tracking Properties
Property5=Material
Prompt5=Material
Type5=Text
PropertySet6=Design Tracking Properties
Property6=Mass
Prompt6=Mass
Type6=Number
PropertySet7=
Property7=Automatic measurement and description 20211103021320702
Prompt7=Automatic measurement and description
Type7=Heading 1
PropertySet8=User Defined Properties
Property8=ct_cut_info
Prompt8=Update Code
Type8=Text
PropertySet9=User Defined Properties
Property9=ct_description
Prompt9=ct_description
Type9=Text
PropertySet10=User Defined Properties
Property10=ct_remarks
Prompt10=Remarks
Type10=Text
PropertySet11=User Defined Properties
Property11=Cutting Method
Prompt11=Cutting Method
Type11=Text
PropertySet12=
Property12=Sheet Metal Parameters 20211103021320702
Prompt12=Sheet Metal Parameters
Type12=Heading 1
PropertySet13=Sheet Metal Parameters
Property13=Thickness
Prompt13=Thickness
Type13=Number

[Properties Modeling]
; Settings for property editor setup "<Default>"
;AllowSetup=0
;SetupName=MySetup
PropertySet0=
Property0=Project 20211103021023633
Prompt0=Project
Type0=Heading 1
PropertySet1=Design Tracking Properties
Property1=Description
Prompt1=Description
Type1=Text
PropertySet2=Design Tracking Properties
Property2=Part Number
Prompt2=Part Number
Type2=Text
PropertySet3=Design Tracking Properties
Property3=Stock Number
Prompt3=Stock Number
Type3=Text
PropertySet4=
Property4=Physical 20211103021033074
Prompt4=Physical
Type4=Heading 1
PropertySet5=Design Tracking Properties
Property5=Material
Prompt5=Material
Type5=Text
PropertySet6=Design Tracking Properties
Property6=Mass
Prompt6=Mass
Type6=Number
PropertySet7=
Property7=Automatic measurement and description 20211103021320702
Prompt7=Automatic measurement and description
Type7=Heading 1
PropertySet8=User Defined Properties
Property8=ct_cut_info
Prompt8=Update Code
Type8=Text
PropertySet9=User Defined Properties
Property9=ct_description
Prompt9=ct_description
Type9=Text
PropertySet10=User Defined Properties
Property10=ct_remarks
Prompt10=Remarks
Type10=Text
PropertySet11=User Defined Properties
Property11=Cutting Method
Prompt11=Cutting Method
Type11=Text

[Properties Assembly]
; Settings for property editor setup "<Default>" for Assembly
;AllowSetup=0
;SetupName=MySetup
PropertySet0=
Property0=Project 20211103021023633
Prompt0=Project
Type0=Heading 1
PropertySet1=Design Tracking Properties
Property1=Description
Prompt1=Description
Type1=Text
PropertySet2=Design Tracking Properties
Property2=Part Number
Prompt2=Part Number
Type2=Text
PropertySet3=Design Tracking Properties
Property3=Stock Number
Prompt3=Stock Number
Type3=Text
PropertySet4=
Property4=Physical 20211103021033074
Prompt4=Physical
Type4=Heading 1
PropertySet5=Design Tracking Properties
Property5=Mass
Prompt5=Mass
Type5=Number
PropertySet6=
Property6=Automatic measurement and description 20211103021320702
Prompt6=Automatic measurement and description
Type6=Heading 1
PropertySet7=User Defined Properties
Property7=ct_cut_info
Prompt7=Update Code
Type7=Text
PropertySet8=User Defined Properties
Property8=ct_description
Prompt8=ct_description
Type8=Text
PropertySet9=User Defined Properties
Property9=ct_remarks
Prompt9=Remarks
Type9=Text

[Properties Drawing Layout]
; Settings for property editor setup "<Default>" for Drawing
;AllowSetup=0
;SetupName=MySetup
PropertySet0=Summary Information
Property0=Author
Prompt0=Author
Type0=Text
PropertySet1=Design Tracking Properties
Property1=Checked By
Prompt1=Checked By
Type1=Text
PropertySet2=Design Tracking Properties
Property2=Engr Approved By
Prompt2=Engr Approved By
Type2=Text
PropertySet3=Design Tracking Properties
Property3=Engr Date Approved
Prompt3=Engr Date Approved
Type3=Date
PropertySet4=Design Tracking Properties
Property4=Creation Time
Prompt4=Creation Time
Type4=Date
PropertySet5=Summary Information
Property5=Title
Prompt5=Title
Type5=Text
PropertySet6=Design Tracking Properties
Property6=Part Number
Prompt6=Part Number
Type6=Text
PropertySet7=Summary Information
Property7=Revision Number
Prompt7=Revision Number
Type7=Text

[Properties VirtualComponent]
; Settings for property editor setup "<Default>" for VirtualComponent
;AllowSetup=0
;SetupName=MySetup
PropertySet0=
Property0=Project 20211103021023633
Prompt0=Project
Type0=Heading 1
PropertySet1=Design Tracking Properties
Property1=Description
Prompt1=Description
Type1=Text
PropertySet2=Design Tracking Properties
Property2=Part Number
Prompt2=Part Number
Type2=Text
PropertySet3=Design Tracking Properties
Property3=Stock Number
Prompt3=Stock Number
Type3=Text
PropertySet4=
Property4=Physical 20211103021033074
Prompt4=Physical
Type4=Heading 1
PropertySet5=Design Tracking Properties
Property5=Material
Prompt5=Material
Type5=Text
PropertySet6=Design Tracking Properties
Property6=Mass
Prompt6=Mass
Type6=Number

[Property Modes]
; property name       = source, disabled or listonly. 
; MRU.Property Editor.property name = name of ini file section defining context menu
ct_description        = source
ct_material_dwg       = source
ct_kappelengde        = disabled
Cut Length            = disabled
ct_kappebredde        = disabled
Cut Width             = disabled
ct_parts_ini          = disabled
ct_parts_template     = disabled
ct_pe_setup           = disabled
ct_maxarea            = disabled
ct_netarea            = disabled
ct_dimension          = disabled
ct_outer_dimensions   = disabled
Outer Dimensions      = disabled
ct_bredde             = disabled
ct_CrossSectDia       = disabled
ct_dia                = disabled
ct_dia1               = disabled
ct_dia2               = disabled
ct_flenstykkelse      = disabled
ct_hoyde              = disabled
ct_InsideDia          = disabled
ct_insdia             = disabled
ct_lengde             = disabled
ct_length             = disabled
ct_stegtykkelse       = disabled
ct_tykkelse           = disabled
ct_a                  = disabled
ct_b                  = disabled
ct_c                  = disabled
ct_d                  = disabled
ct_d1                 = disabled
ct_h                  = disabled
ct_k                  = disabled
ct_s                  = disabled
ct_t                  = disabled
ct_t2                 = disabled
ct_wt                 = disabled
ct_lenx               = disabled
ct_leny               = disabled
ct_lenz               = disabled
CQTools_X             = disabled
CQTools_Y             = disabled
CQTools_Z             = disabled
Naviate_Range_X       = disabled
Naviate_Range_Y       = disabled
Naviate_Range_Z       = disabled
ct_lenmax             = disabled
ct_lenmid             = disabled
ct_lenmin             = disabled
ct_origin_x           = disabled
ct_origin_y           = disabled
ct_origin_z           = disabled
ct_origin_elevation   = disabled
ct_cog_x              = disabled
ct_cog_y              = disabled
ct_cog_z              = disabled
ct_cog_elevation      = disabled
Sweeplength           = disabled
Naviate_SweepLength   = disabled

Parameterized Template= disabled
Defer Updates         = disabled
SurfaceArea           = disabled
Volume                = disabled
Density               = disabled
Valid MassProps       = disabled
Flat Pattern Width    = disabled
Flat Pattern Length   = disabled
Flat Pattern Area     = disabled
Sheet Metal Rule      = disabled
Sheet Metal Width     = disabled
Sheet Metal Length    = disabled
Sheet Metal Area      = disabled
FamilyId              = disabled
Material Identifier   = disabled
Appearance            = disabled

ct_size_designation   = disabled
ct_piping_qty         = disabled
ct_piping_description = disabled
ident_code            = disabled
article_number        = disabled 
article_name          = disabled

General Tol Class     = disabled

x_dropd_lonly         = listonly
NS FS                 = listonly
; Stock Number          = listonly

; Category_1            = listonly
; Category_2            = listonly
; Category_3            = listonly
; Category_4            = listonly

MRU.Property Editor.User Defined Properties.ct_cut_info = Cadit Cut Info Description list Menu1

;MRU.Property Editor.User Defined Properties.General Tol Class = General Tol Class list Menu1
MRU.Property Editor.User Defined Properties.Tolerance = Tolerance list Menu1

[Property Modes Assembly]
; property name       = source, disabled or listonly. 
; MRU.Property Editor.property name = name of ini file section defining context menu
;propertyname         = disabled

[Property Modes Modeling]
; property name       = source, disabled or listonly. 
; MRU.Property Editor.property name = name of ini file section defining context menu
;propertyname         = disabled

[Property Modes Sheet Metal]
; property name       = source, disabled or listonly. 
; MRU.Property Editor.property name = name of ini file section defining context menu
;propertyname         = disabled

[Property Modes Drawing Layout]
; property name       = source, disabled or listonly. 
; MRU.Property Editor.property name = name of ini file section defining context menu
;propertyname         = disabled

[Property Modes Weld]
; property name       = source, disabled or listonly. 
; MRU.Property Editor.property name = name of ini file section defining context menu
;propertyname         = disabled

[Property Modes MyCustom]
; property name       = source, disabled or listonly. 
; MRU.Property Editor.property name = name of ini file section defining context menu
;propertyname         = disabled

[Property StarToolTip]
; property name       = tooltip text
; Description         = Property may be overwritten by Cadit Update Properties
; Part Number         = Property may be overwritten by Cadit Update Properties
ct_description        = Property may be overwritten by Cadit Update Properties
Stock Number          = Property may be overwritten by Cadit Update Properties for some update codes (e.g. PL, DPL, PLATE, DPLATE, HRB, SQB, TBAR, INP, IPE, UAP, UNP, UPE, USP)
Cut Length            = Property may be overwritten by Cadit Update Properties
ct_kappelengde        = Property may be overwritten by Cadit Update Properties
Cut Width             = Property may be overwritten by Cadit Update Properties
ct_kappebredde        = Property may be overwritten by Cadit Update Properties
Outer Dimensions      = Property may be overwritten by Cadit Update Properties
ct_outer_dimensions   = Property may be overwritten by Cadit Update Properties
ct_lenx               = Property may be overwritten by Cadit Update Properties
ct_leny               = Property may be overwritten by Cadit Update Properties
ct_lenz               = Property may be overwritten by Cadit Update Properties
ct_lenmax             = Property may be overwritten by Cadit Update Properties
ct_lenmid             = Property may be overwritten by Cadit Update Properties
ct_lenmin             = Property may be overwritten by Cadit Update Properties
ct_maxarea            = Property may be overwritten by Cadit Update Properties
ct_netarea            = Property may be overwritten by Cadit Update Properties
ct_weight             = Property may be overwritten by Cadit Update Properties
Original Part Number  = Property may be overwritten by Cadit Update Properties
Original Stock Number = Property may be overwritten by Cadit Update Properties
ct_section_area       = Property may be overwritten by the exported ct_section_area parameter
Sheet Metal Parameters.Thickness = For Sheet Metal parts only

[Property StarToolTip Assembly]
; property name       = tooltip text

[Property StarToolTip Modeling]
; property name       = tooltip text

[Property StarToolTip Sheet Metal]
; property name       = tooltip text

[Property StarToolTip Drawing Layout]
; property name       = tooltip text

[Property StarToolTip Weld]
; property name       = tooltip text

[Property StarToolTip MyCustom]
; property name       = tooltip text

[Property MinLength]
; property name  = min number of characters for property value
x_minl                  = 1
x_minl_dropd            = 3
x_minl_maxl             = 3
x_dropd_minl_maxl       = 3
x_dropd_minl_maxl_lonly = 3

; Category_1              = 1
; Category_2              = 1
; Category_3              = 1
; Category_4              = 1

[Property MinLength Assembly]
; property name  = min number of characters for property value

[Property MinLength Modeling]
; property name  = min number of characters for property value

[Property MinLength Sheet Metal]
; property name  = min number of characters for property value

[Property MinLength Drawing Layout]
; property name  = min number of characters for property value

[Property MinLength Weld]
; property name  = min number of characters for property value

[Property MinLength MyCustom]
; property name  = min number of characters for property value

[Property MaxLength]
; property name  = max number of characters for property value
x_maxl                  = 15
x_maxl_low              = 10
x_maxl_upp              = 5
x_maxl_dropd            = 10
x_maxl_dropd_upp        = 10
x_dropd_minl_maxl       = 5
x_dropd_minl_maxl_lonly = 5
x_minl_maxl             = 5

[Property MaxLength Assembly]
; property name  = max number of characters for property value

[Property MaxLength Modeling]
; property name  = max number of characters for property value

[Property MaxLength Sheet Metal]
; property name  = max number of characters for property value

[Property MaxLength Drawing Layout]
; property name  = max number of characters for property value

[Property MaxLength Weld]
; property name  = max number of characters for property value

[Property MaxLength MyCustom]
; property name  = max number of characters for property value

[Property TextCase]
; property name  = lower or upper
x_low            = lower
x_maxl_low       = lower
x_upp            = upper
x_maxl_upp       = upper
x_maxl_dropd_upp = upper
Weld Type        = upper

[Property TextCase Assembly]
; property name  = lower or upper

[Property TextCase Modeling]
; property name  = lower or upper

[Property TextCase Sheet Metal]
; property name  = lower or upper

[Property TextCase Drawing Layout]
; property name  = lower or upper

[Property TextCase Weld]
; property name  = lower or upper

[Property TextCase MyCustom]
; property name  = lower or upper

[Property DropDownFile]
; property name         = path\textfilename (default path is common folder\Property Editor\)
Cutting Method          = CuttingMethods.txt

x_dropd                 = example_dropdown.txt
x_minl_dropd            = example_dropdown.txt
x_dropd_lonly           = example_dropdown_listonly.txt
x_maxl_dropd            = example_maxlength_dropdown.txt
x_maxl_dropd_upp        = example_maxlength_dropdown_upper.txt
Weld Group              = WeldGroup.txt
Weld Type               = WeldType.txt
NS FS                   = NSFS.txt
; Stock Number            = StockNumber (pp:ct_cut_info).txt 
; Grade                   = Grade (Material:).txt

; Category_1             = %ExcelFile%\Column_1.txt
; Category_2             = %ExcelFile%\Column_2_(pp:Category_1).txt
; Category_3             = %ExcelFile%\Column_3_(pp:Category_1)_(pp:Category_2).txt
; Category_4             = %ExcelFile%\Column_4_(pp:Category_1)_(pp:Category_2)_(pp:Category_3).txt

[Property DropDownFile Assembly]
; property name         = path\textfilename (default path is common folder\Property Editor\)

[Property DropDownFile Modeling]
; property name         = path\textfilename (default path is common folder\Property Editor\)

[Property DropDownFile Sheet Metal]
; property name         = path\textfilename (default path is common folder\Property Editor\)

[Property DropDownFile Drawing Layout]
; property name         = path\textfilename (default path is common folder\Property Editor\)

[Property DropDownFile Weld]
; property name         = path\textfilename (default path is common folder\Property Editor\)

[Property DropDownFile MyCustom]
; property name         = path\textfilename (default path is common folder\Property Editor\)

[Standard Expression List]
; Expression# = expression to show in context menu
Expression1 = =<Description>
Expression2 = =<Part Number>
Expression3 = =<Stock Number>
Expression4 = =<ct_lenx>
Expression5 = =<ct_leny>
Expression6 = =<ct_lenz>
Expression7 = =<ct_lenmax>
Expression8 = =<ct_lenmid>
Expression9 = =<ct_lenmin>
Expression10 = =<ct_description>
; Expression11 = =<Naviate_Range_X>
; Expression12 = =<Naviate_Range_Y>
; Expression13 = =<Naviate_Range_Z>
; Expression14 = =<Naviate_SweepLength>
; Expression15 = =<CQTools_X>
; Expression16 = =<CQTools_Y>
; Expression17 = =<CQTools_Z>
; Expression18 = =<Sweeplength>

[Standard Source Properties]
; settings for source property editor dialog
ct_description1  = ct_cut_info
ct_description2  = Design Tracking Properties.Stock Number
ct_description3  = ct_remarks
ct_material_dwg1 = ct_dwg_ref
Cut Length1      = ct_cut_info
Cut Width1       = ct_cut_info
;ct_material_dwg2 = abc
;ct_material_dwg3 = Design Tracking Properties.Part Number

[Standard None Properties]
; enable disabled properties if ct_cut_info is NONE
; property name# = disabled property name
ct_cut_info1     = ct_description
ct_cut_info2     = ct_kappelengde
ct_cut_info3     = ct_kappebredde
ct_cut_info4     = Cut Length
ct_cut_info5     = Cut Width

[Cadit Cut Info Description list Menu1 Settings]
; AddCode = 1 shows both code and description for menu items, e.g. "PL=Plate" -> "PL: Plate"
; AddCode = 0 shows description only for menu items,          e.g. "PL=Plate" -> "Plate" 
;AddCode = 0

[Cadit Cut Info Description list Menu1]
; code = description
; Menu.name of sub menu = description
Menu.Cadit Cut Info Description list Menu2 = Plates
PL    = Plate extent
--    = --
Menu.Cadit Cut Info Description list Menu3 = Profiles
L     = Longest length
Z     = Z extent
Menu.Cadit Cut Info Description list Menu4 = Profile types
--    = --
Menu.Cadit Cut Info Description list Menu5 = Other
--    = --
None  = No automatic description
 
[Cadit Cut Info Description list Menu2]  ; plates
PL    = Plate extent
DPL   = Round plate diameter
;PLATE = Plate extent
;DPLATE= Round plate diameter
--    = --
XY    = X and Y extent
XZ    = X and Z extent
YZ    = Y and Z extent
--    = --
TXY   = X and Y extent. Thickness from ct_tykkelse
TXZ   = X and Z extent. Thickness from ct_tykkelse
TYZ   = Y and Z extent. Thickness from ct_tykkelse
PXY   = X and Y extent. Thickness from Z extent
PXZ   = X and Z extent. Thickness from Y extent
PYZ   = Y and Z extent. Thickness from X extent
--    = --
DXY   = Diameter if X and Y are equal
DXZ   = Diameter if X and Z are equal
DYZ   = Diameter if Y and Z are equal
--    = --
FPE   = Sheet metal extent
FPE1  = Sheet metal extent, flat plates
FPEZ  = Sheet metal extent, flat plates. Thickness is Z 
 
[Cadit Cut Info Description list Menu3]  ; profiles
L     = Longest length
--    = --
X     = X extent
Y     = Y extent
Z     = Z extent
--    = --
LVDA  = Length from volume divided by area. Area from ct_section_area 
--    = --
LSWL  = Sum of sweep path lengths
 
[Cadit Cut Info Description list Menu4]  ; profile types
FL    = Flat bar 
RB    = Round bar
HRB   = Half round bar
SQB   = Square bar
TBAR  = T bar
--    = --
INP   = INP profile
IPE   = IPE profile
UAP   = UAP profile
UNP   = UNP profile
UPE   = UPE profile
USP   = USP profile

[Cadit Cut Info Description list Menu5]  ; Other
D     = Description
PN    = Part Number
SN    = Stock Number
FN    = File name
;--    = --
;BOLT  = Bolt. (ct_boltdimension x ct_lengde ct_boltdescription ct_remarks)
;--    = --
;AAW   = Architectural Arc Wall
;ACP   = Architectural Ceiling Panel
;ACPH  = Architectural Ceiling Panel Hatch
;ACPT  = Architectural Ceiling Panel Tiles
;AED   = Architectural Door
;AEDA  = Architectural Door A
;AEDAS = Architectural Sliding Door A
;AEDB  = Architectural Door B
;AEDBS = Architectural Sliding Door B
;AEDF  = Architectural Data Floor
;AEDS  = Architectural Sliding Door
;AEPD  = Architectural Panel Door
;AEW   = Architectural Window
;ATW   = Architectural Tee Wall
;AW    = Architectural Wall

[General Tol Class list Menu1 Settings]
AddCode = 0
 
[General Tol Class list Menu1]
ISO 2768 = ISO 2768
ISO 22034 = ISO 22034
 
[Tolerance list Menu1 Settings]
;AddCode = 0
 
[Tolerance list Menu1]
Menu.Tolerance list Menu2 = ISO 2768
Menu.Tolerance list Menu3 = ISO 22034
 
[Tolerance list Menu2 Settings]
AddCode = 0
SetProperty1=User Defined Properties.General Tol Class
SetValue1=ISO 2768
 
[Tolerance list Menu2]
ISO 2768-1:1989 = General Tolerances, Tolerances for Linear and Angular
ISO 2768-2:1989 = General Tolerances, Geometrical Tolerances 
 
[Tolerance list Menu3 Settings]
AddCode = 0
SetProperty1=User Defined Properties.General Tol Class
SetValue1=ISO 22034
 
[Tolerance list Menu3]
ISO 22034-1:2007 = Steel wire and wire products -- Part 1: General test methods
ISO 22034-2:2007 = Steel wire and wire products -- Part 2: Tolerances on wire dimensions
ISO 22034-3:2007 = Steel wire and wire products 
 
[Special Properties Assembly]
; Always add Cadit special properties in Property Editor Setup for Assembly
PropertySet0=User Defined Properties
Property0=ct_cut_info
Prompt0=ct_cut_info
Type0=Text
 
PropertySet1=User Defined Properties
Property1=ct_description
Prompt1=ct_description
Type1=Text
 
PropertySet2=User Defined Properties
Property2=ct_kappelengde
Prompt2=ct_kappelengde
Type2=Text
 
PropertySet3=User Defined Properties
Property3=ct_kappebredde
Prompt3=ct_kappebredde
Type3=Text
 
PropertySet4=User Defined Properties
Property4=Cut Length
Prompt4=Cut Length
Type4=Text
 
PropertySet5=User Defined Properties
Property5=Cut Width
Prompt5=Cut Width
Type5=Text
 
PropertySet6=User Defined Properties
Property6=ct_dp_reference
Prompt6=Draw Plates Reference
Type6=Text
 
[Special Properties Modeling]
; Always add Cadit special properties in Property Editor Setup
PropertySet0=User Defined Properties
Property0=ct_cut_info
Prompt0=Update Code
Type0=Text
 
PropertySet1=User Defined Properties
Property1=ct_description
Prompt1=ct_description
Type1=Text
 
PropertySet2=User Defined Properties
Property2=ct_kappelengde
Prompt2=ct_kappelengde
Type2=Text
 
PropertySet3=User Defined Properties
Property3=ct_kappebredde
Prompt3=ct_kappebredde
Type3=Text
 
PropertySet4=User Defined Properties
Property4=ct_dwg_ref
Prompt4=ct_dwg_ref
Type4=Text
 
PropertySet5=User Defined Properties
Property5=ct_material_dwg
Prompt5=ct_material_dwg
Type5=Text
 
PropertySet6=User Defined Properties
Property6=ct_lenx
Prompt6=ct_lenx
Type6=Text
 
PropertySet7=User Defined Properties
Property7=ct_leny
Prompt7=ct_leny
Type7=Text
 
PropertySet8=User Defined Properties
Property8=ct_lenz
Prompt8=ct_lenz
Type8=Text
 
PropertySet9=User Defined Properties
Property9=ct_lenmax
Prompt9=ct_lenmax
Type9=Text
 
PropertySet10=User Defined Properties
Property10=ct_lenmid
Prompt10=ct_lenmid
Type10=Text
 
PropertySet11=User Defined Properties
Property11=ct_lenmin
Prompt11=ct_lenmin
Type11=Text
 
PropertySet12=User Defined Properties
Property12=ct_section_area
Prompt12=ct_section_area
Type12=Text
 
PropertySet13=User Defined Properties
Property13=ct_assembly_position
Prompt13=ct_assembly_position
Type13=Text
 
PropertySet14=User Defined Properties
Property14=ct_floor_elevation
Prompt14=ct_floor_elevation
Type14=Text
 
PropertySet15=User Defined Properties
Property15=ct_remarks
Prompt15=Remarks
Type15=Text
 
PropertySet16=User Defined Properties
Property16=ct_sheet_ref
Prompt16=ct_sheet_ref
Type16=Text
 
PropertySet17=User Defined Properties
Property17=General Tol Class
Prompt17=General Tol Class
Type17=Text
 
PropertySet18=User Defined Properties
Property18=Tolerance
Prompt18=Tolerance
Type18=Text
 
PropertySet19=User Defined Properties
Property19=Cut Length
Prompt19=Cut Length
Type19=Text
 
PropertySet20=User Defined Properties
Property20=Cut Width
Prompt20=Cut Width
Type20=Text
 
PropertySet21=User Defined Properties
Property21=ct_dp_remarks
Prompt21=Draw Plates Remarks
Type21=Text
 
PropertySet22=User Defined Properties
Property22=Cutting Method
Prompt22=Cutting Method
Type22=Text
 
[Special Properties Sheet Metal]
; Always add Cadit special properties in Property Editor Setup
PropertySet0=User Defined Properties
Property0=ct_cut_info
Prompt0=Update Code
Type0=Text
 
PropertySet1=User Defined Properties
Property1=ct_description
Prompt1=ct_description
Type1=Text
 
PropertySet2=User Defined Properties
Property2=ct_kappelengde
Prompt2=ct_kappelengde
Type2=Text
 
PropertySet3=User Defined Properties
Property3=ct_kappebredde
Prompt3=ct_kappebredde
Type3=Text
 
PropertySet4=User Defined Properties
Property4=ct_dwg_ref
Prompt4=ct_dwg_ref
Type4=Text
 
PropertySet5=User Defined Properties
Property5=ct_material_dwg
Prompt5=ct_material_dwg
Type5=Text
 
PropertySet6=User Defined Properties
Property6=ct_lenx
Prompt6=ct_lenx
Type6=Text
 
PropertySet7=User Defined Properties
Property7=ct_leny
Prompt7=ct_leny
Type7=Text
 
PropertySet8=User Defined Properties
Property8=ct_lenz
Prompt8=ct_lenz
Type8=Text
 
PropertySet9=User Defined Properties
Property9=ct_lenmax
Prompt9=ct_lenmax
Type9=Text
 
PropertySet10=User Defined Properties
Property10=ct_lenmid
Prompt10=ct_lenmid
Type10=Text
 
PropertySet11=User Defined Properties
Property11=ct_lenmin
Prompt11=ct_lenmin
Type11=Text
 
PropertySet12=User Defined Properties
Property12=ct_section_area
Prompt12=ct_section_area
Type12=Text
 
PropertySet13=User Defined Properties
Property13=ct_assembly_position
Prompt13=ct_assembly_position
Type13=Text
 
PropertySet14=User Defined Properties
Property14=ct_floor_elevation
Prompt14=ct_floor_elevation
Type14=Text
 
PropertySet15=User Defined Properties
Property15=ct_remarks
Prompt15=Remarks
Type15=Text
 
PropertySet16=User Defined Properties
Property16=ct_sheet_ref
Prompt16=ct_sheet_ref
Type16=Text
 
PropertySet17=User Defined Properties
Property17=General Tol Class
Prompt17=General Tol Class
Type17=Text

PropertySet18=User Defined Properties
Property18=Tolerance
Prompt18=Tolerance
Type18=Text

PropertySet19=User Defined Properties
Property19=Cut Length
Prompt19=Cut Length
Type19=Text

PropertySet20=User Defined Properties
Property20=Cut Width
Prompt20=Cut Width
Type20=Text

PropertySet21=Sheet Metal Parameters
Property21=Thickness
Prompt21=Thickness
Type21=Number

PropertySet22=User Defined Properties
Property22=ct_dp_remarks
Prompt22=Draw Plates Remarks
Type22=Text

PropertySet23=User Defined Properties
Property23=Cutting Method
Prompt23=Cutting Method
Type23=Text

[Special Properties Drawing Layout]
; Always add Cadit special properties in Property Editor Setup for Drawing
PropertySet0=User Defined Properties
Property0=ct_scale
Prompt0=ct_scale
Type0=Text

[Special Properties Weld]
; Always add Cadit special properties in Property Editor Setup
PropertySet0=User Defined Properties
Property0=Weld No
Prompt0=Weld No
Type0=Text
PropertySet1=User Defined Properties
Property1=Weld Length
Prompt1=Weld Length
Type1=Text
PropertySet2=User Defined Properties
Property2=Thickness
Prompt2=Thickness
Type2=Text
PropertySet3=User Defined Properties
Property3=Weld Group
Prompt3=Weld Group
Type3=Text
PropertySet4=User Defined Properties
Property4=Weld Type
Prompt4=Weld Type
Type4=Text
PropertySet5=User Defined Properties
Property5=NS FS
Prompt5=NS FS
Type5=Text
PropertySet6=User Defined Properties
Property6=Weld Round
Prompt6=Weld Round
Type6=Yes or No
PropertySet7=User Defined Properties
Property7=Weld Field
Prompt7=Weld Field
Type7=Yes or No
PropertySet8=User Defined Properties
Property8=Weld Size NS
Prompt8=Weld Size NS
Type8=Text
PropertySet9=User Defined Properties
Property9=Weld Size FS
Prompt9=Weld Size FS
Type9=Text

[DocumentSubTypeSelector]
; Document Sub Type is found in iProperty Design Tracking Properties.Document SubType Name. This may be
; overridden by adding one of the options. 
; 
; MyCustom
DocumentType0=MyCustom
PropertyExist0=
PropertyEqualsTo0=User Defined Properties.MyCustom|True
AlternativeNames0=
DocumentExtention0=

; Weld
DocumentType1=Weld
PropertyExist1=User Defined Properties.Weld No
PropertyEqualsTo1=
AlternativeNames1=
DocumentExtention1=

; Sheet Metal
DocumentType2=Sheet Metal
PropertyExist2=
PropertyEqualsTo2=
AlternativeNames2=
DocumentExtention2=

; Assembly
DocumentType3=Assembly
PropertyExist3=
PropertyEqualsTo3=
AlternativeNames3=Weldment|Tube & Pipe|Presentation
DocumentExtention3=iam

; Part
DocumentType4=Modeling
PropertyExist4=
PropertyEqualsTo4=
;AlternativeNames4=Sheet Metal|Modellieren
AlternativeNames4=Modellieren
DocumentExtention4=ipt

; Drawing
DocumentType5=Drawing Layout
PropertyExist5=
PropertyEqualsTo5=
AlternativeNames5=
DocumentExtention5=

; VirtualComponent
DocumentType6=VirtualComponent
PropertyExist6=
PropertyEqualsTo6=
PropertyEqualsTo6=
AlternativeNames6=
DocumentExtention6=
```