--- title: "CT_CUT_INFO property" slug: "ct-cut-info-property" updated: 2022-06-29T14:21:41Z published: 2022-06-29T14:21:41Z canonical: "help.sovelia.com/ct-cut-info-property" --- > ## Documentation Index > Fetch the complete documentation index at: https://help.sovelia.com/llms.txt > Use this file to discover all available pages before exploring further. # CT_CUT_INFO property The table below shows valid values for the ct_cut_info property. | Value | Description | Purpose | Standard Part | Sheet Metal Part | Assembly | Result | | --- | --- | --- | --- | --- | --- | --- | | L | Longest length | Measures the longest length on run meter parts. | The longest of the lengths in the x, y or z direction. | The length of the flat pattern. | | ct_description = (DescriptionWithCutInfo:) L=(ExtL,0:) | | X | X extent | Measures run meter parts in x direction. | The length in x direction. | The x value of the extents of the flat pattern | | | | Y | Y extent | Measures run meter parts in y direction. | The length in y direction. | The y value of the extents of the flat pattern | | | | Z | Z extent | Measures run meter parts in z direction. | The length in z direction. | The thickness of the flat pattern | | | | FPEL | Flat bar | Measures length, width and thickness of a flat bar. | The length is the largest of the lengths in the x, y or z direction, thickness is the smallest and width is the medium. | Length, width and thickness of the flat pattern. | | | | RB | Round bar | Measures length and diameter of a round bar. | Measures in x, y and z direction. If two of the distances are equal they are assumed to be the diameter. The third distance is the length. | As standard part. | | | | BOLT | Bolt. Length from ct_lengde | Bolts | Bolt length is the value of parameter ct_lengde. Additional information from the property ct_boltdescription | As standard part. | | | | | | | | | | | | D | Description | Copies the text from the Description property. | From Description property | From Description property | From Description property | ct_description = = | | PN | Part Number | Copies the text from the Part Number property. | From Part Number property | From Part Number property | From Part Number property | ct_description = = | | SN | Stock Number | Copies the text from the Stock Number property. | From Stock Number property | From Stock Number property | From Stock Number property | ct_description = = | | | | | | | | | | PL | Plate extent | Measures length, width and thickness of a plate. | Length is the largest of the lengths in the x, y or z direction, thickness is the smallest and width is the medium. | Length and width of the flat pattern. Thickness from sheet metal rule. | | | | DPL | Round plate diameter | Measures thickness and diameter of a round plate. | Measures in x, y and z direction. If two of the distances are equal they are assumed to be the diameter. The third distance is the thickness. | | | | | XY / YX | X and Y extent | Square meter parts measured in x and y direction. | Length is the largest of the lengths in x and y direction. Width is the other one. | Length is the largest of the x and y extents of the flat pattern. Width is the other one. | | | | XZ / ZX | X and Z extent | Square meter parts measured in x and z direction. | Length is the largest of the lengths in x and z direction. Width is the other one. | Length is the largest of the x and z extents of the flat pattern. Width is the other one. | | | | YZ / ZY | Y and Z extent | Square meter parts measured in y and z direction. | Length is the largest of the length in y and z direction. Width is the other one. | Length is the largest of the y and z extents of the flat pattern. Width is the other one. | | | | TXY / TYX | X and Y extent. Thickness from ct_tykkelse | Square meter parts measured in x and y direction. | Length is the largest of the lengths in x and y direction. Width is the other one. Thickness is the value of parameter ct_tykkelse. | Length is the largest of the x and y extents of the flat pattern. Width is the other one. Thickness is the value of parameter ct_tykkelse. | | | | TXZ / TZX | X and Z extent. Thickness from ct_tykkelse | Square meter parts measured in x and z direction. | Length is the largest of the lengths in x and z direction. Width is the other one. Thickness is the value of parameter ct_tykkelse. | Length is the largest of the x and z extents of the flat pattern. Width is the other one. Thickness is the value of parameter ct_tykkelse. | | | | TYZ / TZY | Y and Z extent. Thickness from ct_tykkelse | Square meter parts measured in y and z direction. | Length is the largest of the lengths in y and z direction. Width is the other one. Thickness is the value of parameter ct_tykkelse. | Length is the largest of the y and z extents of the flat pattern. Width is the other one. Thickness is the value of parameter ct_tykkelse. | | | | PXY / PYX | X and Y extent. Thickness from Z extent | Square meter parts measured in x and y direction. | Length is the largest of the lengths in x and y direction. Width is the other one. Thickness is the length in z direction. | Length is the largest of the x and y extents of the flat pattern. Width is the other one. Thickness is the z extent. | | | | PXZ / PZX | X and Z extent. Thickness from Y extent | Square meter parts measured in x and z direction. | Length is the largest of the lengths in x and z direction. Width is the other one. Thickness is the length in y direction. | Length is the largest of the x and z extents of the flat pattern. Width is the other one. Thickness is the y extent. | | | | PYZ / PZY | Y and Z extent. Thickness from X extent | Square meter parts measured in y and z direction. | Length is the largest of the lengths in y and z direction. Width is the other one. Thickness is the length in x direction. | Length is the largest of the y and z extents of the flat pattern. Width is the other one. Thickness is the x extent. | | | | DXY / DYX | Diameter if X and Y are equal | Square meter parts measured in x and y direction. Value written as diameter if x and y are equal. | Measure lengths in x and y direction. Diameter if equal. | Lengths of x and y extents of flat pattern Diameter if equal.. | | | | DXZ / DZX | Diameter if X and Z are equal | Square meter parts measured in x and z direction. Value written as diameter if x and y are equal. | Measure lengths in x and z direction. Diameter if equal. | Lengths of x and z extents of flat pattern Diameter if equal.. | | | | DYZ / DZY | Diameter if Y and Z are equal | Square meter parts measured in y and z direction. Value written as diameter if x and y are equal. | Measure lengths in y and z direction. Diameter if equal. | Lengths of y and z extents of flat pattern Diameter if equal.. | | | | FPE | Sheet metal extent | Square meter parts measured with Flat Pattern Extension values. | Length and width of the flat pattern. | | | | | FPE1 | Sheet metal extent, flat plates | Square meter parts measured with Flat Pattern Extension values. Flat plates not aligned with the coordinate axis. Treated as flat plates by Make Part Drawings. | | Length and width of the flat pattern. | | | | FPEZ | Sheet metal extent, flat plates. Thickness is Z | Square meter parts measured with Flat Pattern Extension values. Flat plates not aligned with the coordinate axis. Treated as flat plates by Make Part Drawings. | | Length and width of the flat pattern. Thickness is the z extent of the flat pattern. | | | | | | | | | | | | AAW | Architectural Arc Wall | Architectural Elements Arc Wall | Measures wall height. Measures wall area in m2. Wall area is volume of part divided by wall thickness. Wall thickness is the parameter ct_wt. | | | ct_wall_area = (wallarea_m2,2:) ct_specification = r = (pv: ct_radius), a = (pv: ct_vinkel) ct_size = h = (LenZ:) | | ACP | Architectural Ceiling Panel | Architectural Elements Ceiling Panel | Measures ceiling panel area in m2. Area is volume of part divided by thickness. Thickness is the parameter ct_wt. | | | ct_wall_area = (wallarea_m2,2:) | | ACPH | Architectural Ceiling Panel Hatch | Architectural Elements Ceiling Panel Hatch | | | | | | ACPT | Architectural Ceiling Panel Tiles | Architectural Elements Ceiling Panel Tiles | Measures ceiling panel area in m2. Area is volume of part divided by thickness. Thickness is the parameter ct_wt. | | | ct_wall_area = (wallarea_m2,2:) | | AED | Architectural Door | Architectural Elements Door | | | | | | AEDA | Architectural Door A | Architectural Elements Door A | | | | | | AEDAS | Architectural Sliding Door A | Architectural Elements Sliding Door A | | | | | | AEDB | Architectural Door B | Architectural Elements Door B | | | | | | AEDBS | Architectural Sliding Door B | Architectural Elements Sliding Door B | | | | | | AEDF | Architectural Data Floor | Architectural Elements Data Floor | Measures data floor area in m2. Area is volume of part divided by thickness. Thickness is the parameter ct_wt. | | | ct_wall_area = (wallarea_m2,2:) | | AEDS | Architectural Sliding Door | Architectural Elements Sliding Door | | | | | | AEPD | Architectural Panel Door | Architectural Elements Panel Door | | | | | | AEW | Architectural Window | Architectural Elements Window | | | | | | ATW | Architectural Tee Wall | Architectural Elements Tee Wall | Measures wall height. Measures wall area in m2. Wall area is volume of part divided by wall thickness. Wall thickness is the parameter ct_wt. | | | ct_wall_area = (wallarea_m2,2:) ct_size = h = (LenZ:) | | AW | Architectural Wall | Architectural Elements Wall | Measures wall length and height. Measures wall area in m2. Wall area is volume of part divided by wall thickness. Wall thickness is the parameter ct_wt. | | | ct_wall_area = (wallarea_m2,2:) ct_wall_length = (lenx,1:) ct_size = h = (LenZ:) |